4pcs Set Pin Buckles for 16mm 18mm 20mm 22mm 24mm Watch Straps Bands Kit Replacement Clasp Silver Black Rose Gold Finish -Pins Tool Included

Description

You will receive 4pcs Set ( 1 Buckle, in the size of your choice – 16, 18, 20, 22, or 24mm with the appropriate 2 pins and 1 Tool for Easy Installation and Removal)

These Buckles are made from Stainless Steel and are precisely electroplated in Silver, Black, Gold, and Rose Gold.

They are compatible with most traditional and smartwatches on the market.
They are Highly Polished which give off a stylish look on your wrist.
Easy to Install and Remove with the provided Tool.

>>> Primary color Buckles – Optional:
Silver
Black
Gold
Rose Gold

>>>Buckles Width – Optional:
16mm – (tongue width 2mm)
18mm – (tongue width 3mm)
20mm – (tongue width 3mm)
22mm – (tongue width 3mm)
24mm – (tongue width 3mm)

>>>Personalization:
Available Thicknesses for Spring Bars Pins:
1.5mm
1.8mm
If you don’t choose we will send you the most popular thickness 1.5mm

*(Attention – Some Watch Bands are the same width from the Watch to the Buckle, but some bands narrow and the width decreases in size at the buckle, so it is very important to get the correct size at the spot where the buckle attaches to the band. Usually they are even numbered – such as 16, 18, 20mm etc, but even if they are odd numbered, you can always use this buckle because a slight difference of 0.5mm on each size is not a visible add +1mm.) For example: if you have a band that is 21mm, choose 1mm larger -> the 22mm buckle, this way the width of the band can easily go inside of the width of the buckle.

>>>How to Install:
First Remove the old Buckle from your watch band.
Make sure that you have chosen the right size buckle.
Insert the pin in the band which has to go through the tongue of the buckle and then come out the other side of the band.
Make sure that the new buckle size will match the one that you are trying to replace. (Tips : Make sure the width of the tongue that stays on the middle of the band is the same or very similar size as well, so the installation will be smooth and nice.)

Next Insert the Pin into one of the Buckle Side Holes, but make sure that the tongue of the buckle is on the top position, because if you lock the pin in, you want the tongue in the correct position, not upside down or under.

Since the Pin is with a spring , now you have to connect the other side of the pin into the other buckle hole. You can use the Fork side of the tool to compress the pin and guide it towards the hole so the pin will lock into position.

>>>How to Remove the Buckle:
It is very easy to remove the Buckle. By using the other side of the Pin tool, use the pointy cylinder side to push into the Buckle hole, which will compress the pin inside and you can then gently pull the buckle and band apart.

But if your old Buckle doesn’t have outside holes. You can use the Pin Tool Fork to grip the double flange end of the pin between the watch lug and your band. Then Press Down on the pin and band while slightly pulling the band and pin away.

These Buckles also can be used for creative projects such as purses, shoes, bags, belts and many others as well.

>>>If you have any difficulties or questions, you can contact us and we will assist you. Thank you!