Screwdriver + 2 Band Adapters Connectors for Apple Watch 7 6 5 4 3 2 SE Series 38mm 40mm 41mm 42mm 44mm 45mm

 

Set Includes:
2 Adapters and Special Micro Bit Screw Driver Tip (5-point Star Shape).

• Color options to select from: (Silver, Gold, Rose Gold, Black)

• Watch Case Size options to select from: (38mm 40mm 41mm 42mm 44mm 45mm)

Compatible with Apple Watch 38mm 40mm 41mm 42mm 44mm 45mm –  7 6 5 4 3 2 1 SE All Series

These adapters can be used to attach any desired watch band so you can make your personalized style or replace your previous adapters.

For Adapters 38mm – maximum band width 22mm
For Adapters 40mm – maximum band width 22mm
For Adapters 41mm – maximum band width 22mm
For Adapters 42mm – maximum band width 25mm
For Adapters 44mm – maximum band width 25mm
For Adapters 45mm – maximum band width 25mm

 

Precision  5-point Star Shape Screwdriver Bit:

• Will not strip the tiny delicate screws and will install/remove 1000’s of screws without wearing out.
• The screw driver tip is made from Special High alloy CVM Steel, Hardened, on 4mm hex stock.
• You can use it thousands of times without damaging it.
• ( you can connect the tip on 4mm hex Bit Handle or use it by hand)
• This screw driver is also compatible for :  iPhone 4, 4S, 5, 5C, 5S, 6, 6 Plus, 6S, 6S Plus, SE, 7, 7 Plus, 8, 8 Plus, X

!!! Before you begin to work with the special screw driver tip and adapter,
Make sure to read the very important information so you don’t make any mistakes!!!

Check pictures

1. Unscrew 1 or both of the bolts of the adapters. If you choose to unscrew just 1, the other one just unscrew slightly so it would be easier to work with or move.
2. Then insert the “L” shaped bar holders in the watch band’s hole and make sure they connect to each other in the middle (male and female ends).
3. Put the base of the adapter back in the same position to match the holes  so you can then easily screw back on the bolts.

*The proper side of the adapter:

• Make sure before you tighten the bolts, the center security locking mechanism – the silver color Ellipse should be on the bottom of the band (the bottom will be 2 Black Ellipse and Silver color locking mechanism in the middle). The top of the adapter should be 3 equal Black Ellipses.

*Its is very important the 3 Black Ellipses shapes of the adapter are always on top and face up when installed on the band. This way the locking center mechanism will lock the band to the watch case. If you put the adapter upside down, the adapter will not lock or it will get improperly stuck in the watch case.

 

• When you tighten or unscrew the bolts, do not use too much force because the bolts are small and micro sized. 
• To unscrew the bolts – unscrew counter clockwise. To tighten the bolts – screw clockwise.
  
• When tightening , slowly and gently tighten until the bolt just stops turning.
  
• Don’t use so much force because you will ruin the bolt head.

Watches and bands/straps are not Included!

* If you have any questions, please feel free to ask.*

 

 

Froo www.froo.com | Froo Cross Sell, Free Cross Sell, Cross promote, eBay Marketing, eBay listing Apps, eBay Apps, eBay Application